Official Luthiers Forum! https://luthiersforum.com/forum/ |
|
Radiusing and Kerfing the Sides https://luthiersforum.com/forum/viewtopic.php?f=10146&t=48682 |
Page 1 of 1 |
Author: | ericschaeferguitars [ Tue Dec 13, 2016 9:14 am ] |
Post subject: | Radiusing and Kerfing the Sides |
Author: | Pmaj7 [ Tue Dec 13, 2016 1:12 pm ] |
Post subject: | Re: Radiusing and Kerfing the Sides |
I like your pinching type waist spreader. Is it designed for keeping those flat areas against the mold better than a typical waist pushing type? |
Author: | Hesh [ Tue Dec 13, 2016 2:40 pm ] |
Post subject: | Re: Radiusing and Kerfing the Sides |
Well done Eric! Thanks! |
Author: | ericschaeferguitars [ Tue Dec 13, 2016 5:53 pm ] |
Post subject: | Re: Radiusing and Kerfing the Sides |
pat macaluso wrote: I like your pinching type waist spreader. Is it designed for keeping those flat areas against the mold better than a typical waist pushing type? Thanks, pat. I like it mostly because it works universally with any mold. I never really considered that it works better, necessarily. And maybe it does, I dunno. I think either way works well enough. It's just easier to make the waist spreader this way. |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |