Official Luthiers Forum!
https://luthiersforum.com/forum/

Radiusing and Kerfing the Sides
https://luthiersforum.com/forum/viewtopic.php?f=10146&t=48682
Page 1 of 1

Author:  ericschaeferguitars [ Tue Dec 13, 2016 9:14 am ]
Post subject:  Radiusing and Kerfing the Sides


Author:  Pmaj7 [ Tue Dec 13, 2016 1:12 pm ]
Post subject:  Re: Radiusing and Kerfing the Sides

I like your pinching type waist spreader. Is it designed for keeping those flat areas against the mold better than a typical waist pushing type?

Author:  Hesh [ Tue Dec 13, 2016 2:40 pm ]
Post subject:  Re: Radiusing and Kerfing the Sides

Well done Eric! Thanks!

Author:  ericschaeferguitars [ Tue Dec 13, 2016 5:53 pm ]
Post subject:  Re: Radiusing and Kerfing the Sides

pat macaluso wrote:
I like your pinching type waist spreader. Is it designed for keeping those flat areas against the mold better than a typical waist pushing type?


Thanks, pat. I like it mostly because it works universally with any mold. I never really considered that it works better, necessarily. And maybe it does, I dunno. I think either way works well enough. It's just easier to make the waist spreader this way.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/