Official Luthiers Forum!
https://luthiersforum.com/forum/

Thicknessing the Plates
https://luthiersforum.com/forum/viewtopic.php?f=10146&t=48744
Page 1 of 1

Author:  ericschaeferguitars [ Fri Dec 23, 2016 3:50 pm ]
Post subject:  Thicknessing the Plates

[youtube]https://www.youtube.com/watch?v=VxKi65RhkY8[/youtube]

Author:  Alain Lambert [ Mon Dec 26, 2016 2:26 pm ]
Post subject:  Re: Thicknessing the Plates

Unprotected mooving parts and long sleeves is a good receipe for an injury!

Author:  jshelton [ Mon Dec 26, 2016 6:43 pm ]
Post subject:  Re: Thicknessing the Plates

Alain Lambert wrote:
Unprotected mooving parts and long sleeves is a good receipe for an injury!

Not to mention sanding without a dust mask.

Author:  Pmaj7 [ Tue Dec 27, 2016 3:33 pm ]
Post subject:  Re: Thicknessing the Plates

Yeah, that exposed drum and loose long sleeves is scary. Stay safe!

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/