Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 3:56 pm


All times are UTC - 5 hours





Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 76 posts ]  Go to page Previous  1, 2, 3, 4  Next
Author Message
 Post subject: Re: My challenge build
PostPosted: Wed Jan 25, 2012 12:27 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Dec 27, 2009 2:59 pm
Posts: 458
Location: Northeast Indiana
First name: Phillip
Last Name: Patton
City: Yoder
State: IN
Zip/Postal Code: 46798
Country: USA
Focus: Build
Status: Amateur
I'm more or less done with the inside of the top. I just have to scrape/sand it a little smoother, and then brace it. Oh, and cut the F-holes.

Image

Image


This morning, I worked on the damascus steel I'll be making the tailpiece out of. I might also use it for the tuner buttons.

I started with 13 layers. The thick ones are 1084, which because of it's manganese content etches dark, and the thin layers are 15N20, which has a high nickel content, which resists etching, and so will remain bright. More on that later.

Image


Here's the billet arc welded together, and a handle welded on. The arc welding just holds the layers together while I'm forge welding. Forge welding makes all the layers into one piece.

Image


In the forge:

Image


Here's my power hammer:

Image


Here's the billet after the first weld:

Image


After drawing it out to about 16". It started out 4" long.

Image


Then the surfaces are ground clean:

Image


Next I'll be cutting it into four 4" sections, restacking them and welding. Then do it all one more time. At that point there will be about 200 layers, which should give a nice bold pattern.

_________________
Regards,
Phillip Patton

http://www.pattonblades.com

The bitterness of poor quality lingers long after the sweetness of low price has faded.

https://hoosierbladesmith.wordpress.com


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Wed Jan 25, 2012 12:34 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Apr 03, 2007 7:16 am
Posts: 567
Location: United States
That's Hot. [:Y:]

_________________
Chris Oliver
Infinity Luthiers
...in the shop.

live every minute...


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Wed Jan 25, 2012 12:39 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
Quote:
I've been researching online some, and I think I want to go with parallel bracing for this one.


Yes thats what you want , and I doubt that you are to thin on that . I would go ahead and use it .

I love watching mark work on that damascus steel . u should do a toot on making that steel part on here a seperate thread , that in itself is a kewl thing to see

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
 Post subject: My challenge build
PostPosted: Wed Jan 25, 2012 12:42 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Oct 12, 2010 9:01 pm
Posts: 3031
First name: Tony
Last Name: C
City: Brooklyn
State: NY
Focus: Build
Status: Amateur
Wow! That's very cool! Never saw anyone make demascus steel before! And on a one of a kind archtop ukulele? This might cause a rift in the space-time continuum!

_________________
http://www.CostaGuitars.com
PMoMC


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Wed Jan 25, 2012 2:11 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Mar 01, 2011 1:32 pm
Posts: 3470
First name: Alex
Last Name: Kleon
City: Whitby
State: Ontario
Zip/Postal Code: L1N8X2
Country: Canada
Focus: Build
Status: Amateur
I checked out your web site a while back, and your work is stunning!! I heard that in ancient times, the blacksmith had to work outside of the towns because they thought they were performing magic. :evil: I think they were kind of right. [clap]

Alex

_________________
"Indecision is the key to flexibility" .... Bumper sticker


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Fri Jan 27, 2012 2:31 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Sep 29, 2011 2:54 pm
Posts: 115
First name: Andrew
City: Ottawa
State: ON
Focus: Build
Status: Amateur
+1 [clap]
That tailpiece is going to look awesome. How do you get the pattern into the steel?


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Fri Jan 27, 2012 9:08 pm 
Offline
Mahogany
Mahogany

Joined: Wed Mar 03, 2010 11:25 am
Posts: 89
First name: andrew
Last Name: nelson
City: minneapolis
State: mn
Zip/Postal Code: 55412
Country: US
Focus: Build
Status: Amateur
Phillip, great build. You have my head spinning with the idea of a damascus tailpiece. [:Y:] You may have to add mandolin/uke tailpieces and tuner buttons to your website for sales. I have a feeling it could generate some business.


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Tue Feb 14, 2012 3:58 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Dec 27, 2009 2:59 pm
Posts: 458
Location: Northeast Indiana
First name: Phillip
Last Name: Patton
City: Yoder
State: IN
Zip/Postal Code: 46798
Country: USA
Focus: Build
Status: Amateur
muskr@ wrote:
+1 [clap]
That tailpiece is going to look awesome. How do you get the pattern into the steel?


I'll get to that before too long. There's different ways you can make patterns. This one will involve an angle grinder. More on that later.

In the meantime, I've been working on some other parts.

The truss rod:

Image


The fretboard:

Image


The rim:

Image


The solid laminated linings, which are catalpa:

Image

Image

Sorry, not a lot of detail, but I have a lot going on right now.

I'm having a hard time locating quartersawn black walnut, so I may be using a flat back, instead of carved.

_________________
Regards,
Phillip Patton

http://www.pattonblades.com

The bitterness of poor quality lingers long after the sweetness of low price has faded.

https://hoosierbladesmith.wordpress.com


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Tue Feb 14, 2012 5:05 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5743
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
That is going to be one beautiful guitar!

_________________
"Act your age, not your shoe size" - Prince


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Wed Feb 15, 2012 3:11 am 
Offline
Contributing Member
Contributing Member

Joined: Mon Jul 11, 2011 12:43 am
Posts: 1326
Location: chicagoland, illinois
City: chicagoland
State: illinois
Country: usa
Focus: Build
Status: Amateur
love this project. my grandpa had a little forge and i got to watch him mess around on it a bit. wish i had the space to do that stuff. wont the damascus rust pretty bad....?


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Wed Feb 15, 2012 2:17 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Dec 27, 2009 2:59 pm
Posts: 458
Location: Northeast Indiana
First name: Phillip
Last Name: Patton
City: Yoder
State: IN
Zip/Postal Code: 46798
Country: USA
Focus: Build
Status: Amateur
nyazzip wrote:
love this project. my grandpa had a little forge and i got to watch him mess around on it a bit. wish i had the space to do that stuff. wont the damascus rust pretty bad....?


Damascus is less rust prone than plain carbon steel, thanks to the oxides that form when it's etched. Also, I'll put a good thick coat of wax on it. Might even lacquer it instead of wax.


I need some advice on the F-holes. Does this look like the right size to you all?

Image

_________________
Regards,
Phillip Patton

http://www.pattonblades.com

The bitterness of poor quality lingers long after the sweetness of low price has faded.

https://hoosierbladesmith.wordpress.com


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Wed Feb 15, 2012 4:06 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Dec 27, 2009 2:59 pm
Posts: 458
Location: Northeast Indiana
First name: Phillip
Last Name: Patton
City: Yoder
State: IN
Zip/Postal Code: 46798
Country: USA
Focus: Build
Status: Amateur
Here's the projected location of the f holes. Usually they're closer to the waist, but this is just where the saddle will be so...

Image

_________________
Regards,
Phillip Patton

http://www.pattonblades.com

The bitterness of poor quality lingers long after the sweetness of low price has faded.

https://hoosierbladesmith.wordpress.com


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Wed Feb 15, 2012 4:57 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Apr 03, 2007 7:16 am
Posts: 567
Location: United States
The size looks fine for that body. You might want rotate it a bit counterclockwise, but that's just a personal taste thing. It won't change the sound much, but placement-wise, you might tape the cutouts on and check where the pic/fingernails will be going. If the f-hole has a fragile spot right in line with the strumming motion, it could be a casualty in the near future.

Just something to think about.

Lookin' good.

_________________
Chris Oliver
Infinity Luthiers
...in the shop.

live every minute...


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Wed Feb 15, 2012 6:22 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
I think you will like the lower f hole location for the sound . When I did that with the last Mando-Lind it gave it more bass and a deeper tone . Amazing how 1" diff can make a sound diff. Looking good ! [:Y:]

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Wed Feb 15, 2012 8:38 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Sat May 22, 2010 10:32 am
Posts: 2616
First name: alan
Last Name: stassforth
City: Santa Rosa
State: ca
Zip/Postal Code: 95404
Country: usa
Focus: Build
Status: Amateur
Amazing, Phillip!
You might think about making those tailpieces and selling them to archtop builders!


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Wed Feb 15, 2012 9:19 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Feb 12, 2009 10:27 pm
Posts: 2082
Location: South Carolina
First name: John
Last Name: Cox
Focus: Build
Status: Amateur
Neat... I am really enjoying this one.. I have wanted to try out ERC for a long time.. So far, I haven't been able to locate a piece of it that is free of knots and cracks enough for a top... or I would have to just plan to carve it out of knots....

Looking forward to seeing the tailpiece as well...

Ever thought of fooling with Wootz? I really do have a hankering for a good Wootz knife....

Thanks


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Thu Feb 16, 2012 5:52 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Dec 27, 2009 2:59 pm
Posts: 458
Location: Northeast Indiana
First name: Phillip
Last Name: Patton
City: Yoder
State: IN
Zip/Postal Code: 46798
Country: USA
Focus: Build
Status: Amateur
truckjohn wrote:
Neat... I am really enjoying this one.. I have wanted to try out ERC for a long time.. So far, I haven't been able to locate a piece of it that is free of knots and cracks enough for a top... or I would have to just plan to carve it out of knots....


The knots are really hard to carve...

Quote:
Looking forward to seeing the tailpiece as well...

Ever thought of fooling with Wootz? I really do have a hankering for a good Wootz knife....

Thanks


Not really. I'll probably get into that someday, but no plans yet. I already have more ideas than I have time for. gaah ;)


Yesterday I got the linings for the top installed:

Image

Image

Image

_________________
Regards,
Phillip Patton

http://www.pattonblades.com

The bitterness of poor quality lingers long after the sweetness of low price has faded.

https://hoosierbladesmith.wordpress.com


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Thu Feb 16, 2012 5:55 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Dec 27, 2009 2:59 pm
Posts: 458
Location: Northeast Indiana
First name: Phillip
Last Name: Patton
City: Yoder
State: IN
Zip/Postal Code: 46798
Country: USA
Focus: Build
Status: Amateur
And last night I cut the F-holes, and today I cleaned them up:

Image

Image

Image

Yeah, I know they aren't very symmetrical....


I also braced the top:

Image

Image

and glued it to the rims:

Image

Should get the back glued on tomorrow.

_________________
Regards,
Phillip Patton

http://www.pattonblades.com

The bitterness of poor quality lingers long after the sweetness of low price has faded.

https://hoosierbladesmith.wordpress.com


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Fri Feb 17, 2012 9:17 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Jul 24, 2005 1:53 pm
Posts: 1075
Location: United States
First name: Coe
Last Name: Franklin
City: Decatur
State: IN
Country: USA
You`re making great progress, Phillip.
Was there quite a change in the tap tone after you cut the f-holes and added the braces?
I remember when i was at your place awhile back and I did some tapping on it I remember thinking that this top had a good bit of potential.
I know it had to change things, but how much?
Coe Franklin

_________________
Give me 50 cents worth of regular.
Check my oil too, if you don`t mind,,,


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Fri Feb 17, 2012 10:30 am 
Offline
Koa
Koa
User avatar

Joined: Tue Apr 03, 2007 7:16 am
Posts: 567
Location: United States
Phillip Patton wrote:
Yeah, I know they aren't very symmetrical....

Instead... "They don't look symmetrical and they aren't... on purpose. This is a design feature." :D

Looking good!

_________________
Chris Oliver
Infinity Luthiers
...in the shop.

live every minute...


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Fri Feb 17, 2012 4:38 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Dec 27, 2009 2:59 pm
Posts: 458
Location: Northeast Indiana
First name: Phillip
Last Name: Patton
City: Yoder
State: IN
Zip/Postal Code: 46798
Country: USA
Focus: Build
Status: Amateur
Cocephus wrote:
You`re making great progress, Phillip.
Was there quite a change in the tap tone after you cut the f-holes and added the braces?
I remember when i was at your place awhile back and I did some tapping on it I remember thinking that this top had a good bit of potential.
I know it had to change things, but how much?
Coe Franklin


There was a big change after I cut the f-holes. Difficult to describe, but it sounded "better". :mrgreen:
Then after the braces it sounded "tighter", then after shaving the braces it rang like a bell. [:Y:]

Some more pics:

The back. It's flatsawn, but has nice coloring.

Image


The cedar cross grain seam patch:

Image


Gluing the patch on:

Image


After shaping it with a curved plane:

Image

_________________
Regards,
Phillip Patton

http://www.pattonblades.com

The bitterness of poor quality lingers long after the sweetness of low price has faded.

https://hoosierbladesmith.wordpress.com


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Fri Feb 17, 2012 4:40 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Dec 27, 2009 2:59 pm
Posts: 458
Location: Northeast Indiana
First name: Phillip
Last Name: Patton
City: Yoder
State: IN
Zip/Postal Code: 46798
Country: USA
Focus: Build
Status: Amateur
The braces, which are catalpa:

Image


The braces shaped and trimmed to length:

Image


The linings notched:

Image


And the back glued on:

Image

_________________
Regards,
Phillip Patton

http://www.pattonblades.com

The bitterness of poor quality lingers long after the sweetness of low price has faded.

https://hoosierbladesmith.wordpress.com


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Fri Feb 17, 2012 5:23 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Apr 03, 2007 7:16 am
Posts: 567
Location: United States
Awesome, it is a great feeling the get the box glued up... now the other half of the battle!

_________________
Chris Oliver
Infinity Luthiers
...in the shop.

live every minute...


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Sat Feb 18, 2012 3:47 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Dec 27, 2009 2:59 pm
Posts: 458
Location: Northeast Indiana
First name: Phillip
Last Name: Patton
City: Yoder
State: IN
Zip/Postal Code: 46798
Country: USA
Focus: Build
Status: Amateur
Chris Oliver wrote:
Awesome, it is a great feeling the get the box glued up... now the other half of the battle!


Yep, binding's next. My favorite part. [headinwall]

I decided to use osage orange for the binding. Mostly because it's the only wood I've tried that will survive the tight bend at the waist. Easiest wood to bend that I know of. bliss

Image

Image


I use a laminate trimmer for binding. I made a somewhat convex base to help offset the curve of the back. But that wouldn't work with this carved top, so I made a new base:

Image

Image


Worked pretty good. The thickness of the edge of the top wasn't real uniform, so the initial channel was not straight. So I had to scrape some areas thinner and go over it with the router again.

Image

Image


Installing the tail wedge. A couple times I've forgotten to do this before installing the binding. What a pain that is...

Image

Image

_________________
Regards,
Phillip Patton

http://www.pattonblades.com

The bitterness of poor quality lingers long after the sweetness of low price has faded.

https://hoosierbladesmith.wordpress.com


Top
 Profile  
 
 Post subject: Re: My challenge build
PostPosted: Sat Feb 18, 2012 4:25 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Sat May 22, 2010 10:32 am
Posts: 2616
First name: alan
Last Name: stassforth
City: Santa Rosa
State: ca
Zip/Postal Code: 95404
Country: usa
Focus: Build
Status: Amateur
That thing is coming out really nice! "Installing the tail wedge. A couple times I've forgotten to do this before installing the binding. What a pain that is..."
I've come close to forgetting that as well.
I just put a couple of coats of shellac on my build,
and realized I didn't inlay my logo on the peghead.
I just walked in from doing that today!


Top
 Profile  
 
Display posts from previous:  Sort by  
Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 76 posts ]  Go to page Previous  1, 2, 3, 4  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com