Official Luthiers Forum!

Solely owned and operated by Lance Kragenbrink
It is currently Wed Jun 16, 2021 11:47 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Fri Jun 22, 2018 1:45 pm 
I have this 1952 Gretsch Electro 2 (I reset the neck in another thread)

At some point in it's life, years prior to my acquiring it it had been refinished rather roughly from a sunburst into a blonde.
I tidied up that finish so it looked half decent(wet sanding and buffing) and now want to paint the black stinger on the back of the headstock that pretty well all early 50s vintage Blonde Gretsch (and often Gibson) have.

Obviously I don't know exactly what the guitar was finished with but it seems on the soft side, maybe an acrylic laquer? I can mark it quite easily with my fingernail,

I have a couple of choices on hand.
- Mohawk black gloss nitro
- Dupli-color gloss black acrylic lacquer

Any sugesstions?
I've heard that the duplicolour doesn't always cure well
However the clear nitro I used to tidy up a bit around the neck join seems to eat into the existing finish(as nitro does to itself.)
This made me wonder if a black overlay would end up fuzzy at the edges if it was melting into the original finish
I tempted to go the perhaps easier Dupli-color route.
Though I have used and enjoy the nitro look etc.


Top
  
 
PostPosted: Sat Jun 23, 2018 5:39 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2010 9:06 pm
Posts: 2739
Location: Magnolia DE
First name: Brian
Last Name: Howard
City: Magnolia
State: Delaware
Zip/Postal Code: 19962
Country: United States
Focus: Repair
Status: Professional
Both of those will react very similar with the existing finish. The min difference between the two is that the mohawk is more of an undercoat and should have a clear over it while the duplicolor is a direct gloss and could be left without clear coat.

Fuzzy edges will be determined by your prep work and how well you tape it off.

_________________
Brian

You never know what you are capable of until you actually try.

https://www.howardguitarsdelaware.com/


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com