Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 6:51 pm


All times are UTC - 5 hours


Forum rules


Same rules apply to all forums at the Luthiers Forum.




Post new topic Reply to topic  [ 8 posts ] 
Author Message
PostPosted: Sat Apr 13, 2019 12:07 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Aug 23, 2010 11:42 pm
Posts: 1701
First name: John
Last Name: Parchem
City: Seattle
State: Wa
Zip/Postal Code: 98177
Country: USA
Focus: Build
Status: Amateur
I had a niece build a tenor ukulele in my shop. We ended up with an interesting wolf note on the high G string or the A string tuned to a G. Actually a little flat or a little sharp no problem. We put strings on the Uke and strung it up with the neck clamped in a vice as shown in the picture and all of the strings sound great. I took it out of the vice and the G string sound awful it died right away and there was a rattle. Trying to track down the problem I cleaned up the rattle tightening the tuners and cleaning up the nut slot but the G note still just died. It was weird as everything I touched around the neck made the problem go away. Interesting enough while playing a C cord (just fretting the A sting on 3 fret) all sounded great again. A capo clamped on the headstock cleaned it up as well.

With this information I took a spectrum plot tapping the neck with the strings tuned to pitch muting the strings and lightly holding the neck. I have a steep peak right on 392 Hz (that G string).

It is a spanish heel neck. Sort of in the middle of the road for neck thickness. Other than telling her to always have a capo on her headstock, are there other clever solutions. Most of the ones I thought of are invasive, like replace the flat 4 mm rosewood fretboard with an ebony fret board, maybe making it 5 mm sloping to 4.5 mm at the 12 fret to get it heavier and maintain my setup. Or pull the fretboard and install a metal bar in a truss rod slot.

Thanks for any ideas.

Image

_________________
http://www.Harvestmoonguitars.com


Top
 Profile  
 
PostPosted: Sat Apr 13, 2019 12:45 pm 
Offline
Cocobolo
Cocobolo

Joined: Thu Jul 28, 2016 12:35 pm
Posts: 124
First name: Hans
Last Name: Mattes
City: Petaluma
State: CA
Zip/Postal Code: 94952
Country: United States
Focus: Build
Status: Amateur
Have you tried adding a bit of weight to the headstock to lower the neck's resonant frequency? If that works, thinning the neck a bit to lower its stiffness should have a similar effect.


Top
 Profile  
 
PostPosted: Sat Apr 13, 2019 12:50 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Aug 23, 2010 11:42 pm
Posts: 1701
First name: John
Last Name: Parchem
City: Seattle
State: Wa
Zip/Postal Code: 98177
Country: USA
Focus: Build
Status: Amateur
Hans Mattes wrote:
Have you tried adding a bit of weight to the headstock to lower the neck's resonant frequency? If that works, thinning the neck a bit to lower its stiffness should have a similar effect.


Thanks, Yes a capo on the headstock fixes the issue. Thinning the neck is a possible solution. I think with her carving there was some I could take off the side of the necks as well.

_________________
http://www.Harvestmoonguitars.com


Top
 Profile  
 
PostPosted: Sat Apr 13, 2019 12:57 pm 
Offline
Mahogany
Mahogany

Joined: Mon Dec 24, 2012 7:30 am
Posts: 42
First name: Paul
Last Name: Dzatko
Country: Canada
Focus: Build
David Hurd wrote about a similar problem in his book Left Brain Lutherie
By decreasing the sound hole radius by 1/8 0f an inch he was able to drop
the ukuleles frequency of just over 190 Hz (close to the G strings 196 Hz)
by a semitone or so getting rid of a Thunky G string.

Paul


Top
 Profile  
 
PostPosted: Sat Apr 13, 2019 1:54 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Aug 23, 2010 11:42 pm
Posts: 1701
First name: John
Last Name: Parchem
City: Seattle
State: Wa
Zip/Postal Code: 98177
Country: USA
Focus: Build
Status: Amateur
pkdz wrote:
David Hurd wrote about a similar problem in his book Left Brain Lutherie
By decreasing the sound hole radius by 1/8 0f an inch he was able to drop
the ukuleles frequency of just over 190 Hz (close to the G strings 196 Hz)
by a semitone or so getting rid of a Thunky G string.

Paul

Thanks Paul, The top resonance is not quite on A 211 Hz. That really threw me for a bit. It is the neck that start vibrating at 392 Hz. I think I just hit the lottery in terms of exactly hitting the G with the neck.

_________________
http://www.Harvestmoonguitars.com


Top
 Profile  
 
PostPosted: Sat Apr 13, 2019 2:04 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat May 17, 2008 1:11 pm
Posts: 2335
Location: Spokane, Washington
First name: Pat
Last Name: Foster
Country: USA
Focus: Build
Status: Semi-pro
Is it of short duration? If so, with the rattle, it sounds like it could be a true wolf note. I'd be concerned that taking off enough neck wood to fix it would be too much. Does it respond to weight added anywhere else?

A guy in our luthiers group had a similar problem. He tried a different brand of strings and it went away.

_________________
formerly known around here as burbank
_________________

http://www.patfosterguitars.com


Top
 Profile  
 
PostPosted: Sat Apr 13, 2019 2:47 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Aug 23, 2010 11:42 pm
Posts: 1701
First name: John
Last Name: Parchem
City: Seattle
State: Wa
Zip/Postal Code: 98177
Country: USA
Focus: Build
Status: Amateur
Pat Foster wrote:
Is it of short duration? If so, with the rattle, it sounds like it could be a true wolf note. I'd be concerned that taking off enough neck wood to fix it would be too much. Does it respond to weight added anywhere else?

A guy in our luthiers group had a similar problem. He tried a different brand of strings and it went away.


Yes short duration. As I tune it up between F# and G still sounds good. When I get get very close to G the sustain goes away and I had the rattle. A finger on the nut, a capo on the head stock or even on the neck close to the nut makes the the problem go away. Different brand of strings is a good idea as the resonance changes under tension. In fact pulling the nut causes the 1st fret to become a shorter scale 0 fret and the Uke sounds great no problem. I will try the new strings. Also the student left a bit of a squared off shoulder near the nut so I cleansed that up.

_________________
http://www.Harvestmoonguitars.com


Top
 Profile  
 
PostPosted: Sat Apr 13, 2019 5:03 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Aug 23, 2010 11:42 pm
Posts: 1701
First name: John
Last Name: Parchem
City: Seattle
State: Wa
Zip/Postal Code: 98177
Country: USA
Focus: Build
Status: Amateur
Thanks All,

I calmed down, I went over the instrument fixed a few unrelated things, One change that might have helped was close to the nut the neck was a little squared off so I took that wood off to match the rest of the neck and I went to a different brand of strings. Sounds good now.

_________________
http://www.Harvestmoonguitars.com


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com