Official Luthiers Forum!

Title pretty much says it all. I'll probably re do this on the next build as to me more discriptive with better close ups. But I hope they might be of some intrest to someone.

http://www.youtube.com/watch?v=nw8li-D7sU8
http://www.youtube.com/watch?v=OrBwl2x36nk
http://www.youtube.com/watch?v=f2gzzYQKQyY

Thanks alot Chris for making these videos ! I really like them and they sure are helpful to me. Just made a gobar deck myself, so this was perfectly informative to me. again Thanks.
Everyone should be aware of the effort it takes to make videos like this ! clipping/ editing etc. so a big to you Chris.

Your buddy from the cold country, Lars.

It was given some advice as to putting the back down on the work dish and to have the rim set to the side and apply the glue to the rim and then turn it over and set it on the back. And then have the go bars set to the side ready to go instead of reaching up and getting them. And also that I probably only need half the amount of go bars. It's all about time here. They told me they do it in under a minute with hot hide glue. Sounds like good advice from Grumpy.