***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sun Jul 27, 2025 12:00 pm


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 1 of 1
  [ 7 posts ] 
  Print view Previous topic | Next topic 
Author Message
Mike Baker
PostPosted: Wed Aug 01, 2012 11:42 pm 
Offline
Koa
Koa
User avatar

Joined: Fri Feb 01, 2008 11:37 pm
Posts: 1744
Location: Virginia, USA
Focus: Build
Status: Amateur
Hi. I'm building a guitar with no binding. What size roundover bit would you recommend to round over the edge of the top?
I have a 1/4", but I think that would be too much. The smallest I can find is 1/8". Is this appropriate, or do I need a specialty size?

_________________
Mike

The only thing nescessary for evil to thrive is for good men to do nothing.
Top
 Profile  
 
Shaw
PostPosted: Thu Aug 02, 2012 1:10 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Aug 26, 2011 2:21 am
Posts: 668
Location: Philadelphia
First name: Michael
Last Name: Shaw
City: Philadelphia
State: PA
Zip/Postal Code: 19125
Country: USA
Focus: Repair
Status: Semi-pro
Are we talking electric or acoustic? If acoustic a 1/4 would cut into your kerfing. If we are talking acoustic I would use a 1/16" roundover bit or just do it by hand sanding. I think 1/8 would be to much. On an electric a 1/4" would be okay or even a bigger size. I have used 1/2 and 3/4 on unbound electrics. You can find 1/16 bits online. I know Grizzly and rockler has them as well as Mike

_________________
Another day, another dollar.
Top
 Profile  
 
Mike Baker
PostPosted: Thu Aug 02, 2012 6:48 am 
Offline
Koa
Koa
User avatar

Joined: Fri Feb 01, 2008 11:37 pm
Posts: 1744
Location: Virginia, USA
Focus: Build
Status: Amateur
Thanks, guys.
Shaw, it's an acoustic top.
Todd, my first instinct was to do it the way you described. Think I'll stick with that.
Much appreciated to the both of you.

_________________
Mike

The only thing nescessary for evil to thrive is for good men to do nothing.
Top
 Profile  
 
WudWerkr
PostPosted: Thu Aug 02, 2012 6:59 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
Todd Stock wrote:
None...sand in the radius by forming a 45 degree chamfer, then refining to get a radius that is probably about 1/16" or so. Go slow...take your time...remember not to radius the edge under the fretboard.


+1 have done this several times .

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/
Top
 Profile  
 
David Malicky
PostPosted: Thu Aug 02, 2012 10:12 am 
Offline
Koa
Koa

Joined: Sun Jun 21, 2009 2:40 pm
Posts: 505
First name: David
Last Name: Malicky
City: San Diego
State: CA
Zip/Postal Code: 92111
Country: USA
Focus: Build
Status: Amateur
I like a larger radius so the corners are less fragile and it's more comfortable to hold -- 1/8" or 5/32" roundover bit, set slightly high, then a little hand sanding to smooth transitions. You can start the bit high and lower progressively until you like it.

_________________
David Malicky
Top
 Profile  
 
Mike Baker
PostPosted: Thu Aug 02, 2012 8:32 pm 
Offline
Koa
Koa
User avatar

Joined: Fri Feb 01, 2008 11:37 pm
Posts: 1744
Location: Virginia, USA
Focus: Build
Status: Amateur
Wud, David, thanks.

_________________
Mike

The only thing nescessary for evil to thrive is for good men to do nothing.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 7 posts ] 

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: Dave Rickard and 16 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com