Official Luthiers Forum! • View topic

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

Fret saw recommendation

Page 1 of 1

[ 11 posts ]

Print view

Previous topic | Next topic

Author

Message

dzsmith

Post subject: Fret saw recommendation

Posted: Sat Oct 01, 2016 9:59 am

Contributing Member

Joined: Fri May 18, 2012 8:35 pm
Posts: 2660
First name: D
Last Name: S
State: TX
Country: USA
Focus: Build
Status: Amateur

I've been using the LMI fret saw and after about 8 boards, it is getting pretty dull.
I do like the saw, it's pretty stiff and well made.
I need to replace it and looking for recommendations.
I may just order another.
Thanks,
Dan

_________________
wah
Wah-wah-wah-wah
Wah

Top

Josh H

Post subject: Re: Fret saw recommendation

Posted: Sat Oct 01, 2016 10:04 am

Koa

Joined: Tue Jan 18, 2005 11:36 am
Posts: 1595
State: ON
Country: Canada
Status: Professional

It has been a while since I slotted fretboards manually, but when I was doing them by hand I used a Japanese fret saw. I don't believe LMI carries it now, but StewMac has one. It is more expensive but cuts way faster then the regular fret saw.

http://www.stewmac.com/Luthier_Tools/Types_of_Tools/Saws/Japanese_Fret_Saw.html

_________________
Josh House

Canadian Luthier Supply
http://www.canadianluthiersupply.com
https://www.facebook.com/canadianluthiersupply?ref=hl
House Guitars - Custom Built Acoustic Instruments.
http://www.houseguitars.com

These users thanked the author Josh H for the post: dzsmith (Sat Oct 01, 2016 10:14 am)

Top

DennisK

Post subject: Re: Fret saw recommendation

Posted: Sat Oct 01, 2016 10:30 am

Contributing Member

Joined: Fri Jan 22, 2010 9:59 pm
Posts: 3622
First name: Dennis
Last Name: Kincheloe
City: Kansas City
State: MO
Country: USA
Focus: Build
Status: Amateur

Resharpen it. I use this one http://www.stewmac.com/Luthier_Tools/Types_of_Tools/Saws/Fret_Saw.html, and it was dull when new. One or two strokes on each tooth with a needle file and it cuts like butter.

These users thanked the author DennisK for the post: dzsmith (Sat Oct 01, 2016 11:01 am)

Top

Bri

Post subject: Re: Fret saw recommendation

Posted: Sat Oct 01, 2016 11:04 am

Contributing Member

Joined: Sun May 19, 2013 10:22 am
Posts: 727
First name: Brian
Last Name: McDonald
City: Okanagan Centre
State: British Columbia
Zip/Postal Code: V4V2H6
Country: Canada
Focus: Build
Status: Amateur

I have this saw. Pax has a fairly good reputation as a saw manufacturer.

http://www.leevalley.com/en/Wood/page.a ... 63338&ap=1

_________________
My memory is so good, sometimes I remember things that never happened.

These users thanked the author Bri for the post: dzsmith (Sat Oct 01, 2016 5:26 pm)

Top

Alex Kleon

Post subject: Re: Fret saw recommendation

Posted: Sat Oct 01, 2016 11:11 am

Contributing Member

Joined: Tue Mar 01, 2011 1:32 pm
Posts: 3470
First name: Alex
Last Name: Kleon
City: Whitby
State: Ontario
Zip/Postal Code: L1N8X2
Country: Canada
Focus: Build
Status: Amateur

Bri wrote:

I have this saw. Pax has a fairly good reputation as a saw manufacturer.

http://www.leevalley.com/en/Wood/page.a ... 63338&ap=1

I have the same one. Works pretty good, and cuts on the pull, like a Japanese saw.

Alex

_________________
"Indecision is the key to flexibility" .... Bumper sticker

These users thanked the author Alex Kleon for the post: dzsmith (Sat Oct 01, 2016 5:26 pm)

Top

Josh H

Post subject: Re: Fret saw recommendation

Posted: Sat Oct 01, 2016 1:56 pm

Koa

Joined: Tue Jan 18, 2005 11:36 am
Posts: 1595
State: ON
Country: Canada
Status: Professional

Just make note that the Pax saw is .021 and the other saws are .023" for the kerf. Some wire has a .025" width so you want to make sure the saw kerf matches (or is really close) to the fret wire you are using.

These users thanked the author Josh H for the post: dzsmith (Sat Oct 01, 2016 5:26 pm)

Top

jfmckenna

Post subject: Re: Fret saw recommendation

Posted: Sat Oct 01, 2016 4:27 pm

Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6262
Location: Virginia

If you wax the blade it helps considerable. I make a saw cut in a candle take about 5 stokes and wax it again.

These users thanked the author jfmckenna for the post (total 2): Alex Kleon (Sat Oct 01, 2016 5:31 pm) • dzsmith (Sat Oct 01, 2016 5:25 pm)

Top

Haans

Post subject: Re: Fret saw recommendation

Posted: Sat Oct 01, 2016 5:17 pm

Brazilian Rosewood

Joined: Wed Apr 08, 2009 9:34 am
Posts: 3081

I never had a problem with the SM Japanese fret saw, but I thought the fret depth stop was trash. Cracked and broke. Maybe they have changed the material now, don't know. I got an awful lot of fretboards cut with that saw and it's still sharp. would take me around a half hour to cut 23 slots.

These users thanked the author Haans for the post: dzsmith (Sat Oct 01, 2016 5:25 pm)

Top

sdsollod

Post subject: Re: Fret saw recommendation

Posted: Sat Oct 01, 2016 5:44 pm

Koa

Joined: Thu Jan 10, 2008 5:08 am
Posts: 1906
Location: Raleigh, NC
First name: Steve
Last Name: Sollod
Focus: Build
Status: Amateur

I also use the SM Japanese fret saw and have been happy with it. It's much better than the saw that came with the jig. I didn't get the depth stop because I use it in my old style SM slotting jig. I also stroke the sides with an old candle and that keeps it from binding. Of course I don't do high production. If I did, then probably the way to go would be a jig on a table saw. At my rate of building the "by hand" method works just fine...

_________________
Steve Sollod (pronounced sorta like "Solid")
www.swiftcreekguitars.com

These users thanked the author sdsollod for the post: dzsmith (Sat Oct 01, 2016 6:15 pm)

Top

James Orr

Post subject: Re: Fret saw recommendation

Posted: Sat Oct 01, 2016 10:12 pm

Contributing Member

Joined: Wed Feb 15, 2006 7:37 am
Posts: 4820

I recently used my Lie-Nielsen dovetail saw to slot an ebony board. It was almost effortless. I'm so comfortable using the LN saw from dovetail work, and I really appreciated being able to slot a board with it.

Sent from my iPhone using Tapatalk

These users thanked the author James Orr for the post: dzsmith (Sun Oct 02, 2016 9:13 am)

Top

Rodger Knox

Post subject: Re: Fret saw recommendation

Posted: Mon Oct 03, 2016 11:59 am

Contributing Member

Joined: Fri Jun 22, 2012 11:12 am
Posts: 1170
First name: Rodger
Last Name: Knox
City: Baltimore
State: MD
Zip/Postal Code: 21234
Country: USA
Focus: Build
Status: Amateur

I also like the SM Japanese saw, it's much better than their other saw. I got the Japanese saw when my first SM saw got dull.

_________________
A man hears what he wants to hear, and disreguards the rest. Paul Simon

These users thanked the author Rodger Knox for the post: dzsmith (Mon Oct 03, 2016 4:43 pm)

Top

Page 1 of 1

[ 11 posts ]

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 15 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: