Official Luthiers Forum!

Snowmansnow, the light behind the top photo is beautiful. Nice workmanship. I'm going to write myself a note so I can remember to take a picture of my next top the same way.

_________________
Brad Hall
Mystic Dawg Guitars

I've been learning how to French polish and have been working on this size 5 off and on for months. At first I tried to level and buff but I didnt like the result so I decided to keep working until I figured it out. The comment in one of the FP threads about working with a dry muneca (sp?) Turned out to be the key. Got more to learn but I'm declaring this one done!
edit: This is Royal Lac, by the way.

Yes Greg, I just finally might actually finish this one

_________________
Steve Smith
"Music is what feelings sound like"

Whipping out an experimental Cedar body electric.
Probably a waste of time, but I'll have a decent neck to recylcle if the body snaps under tension.
Very light weight and very prone to dents.
I'm in the planning stage for a pimped-out Explorer build. I want to replace the two I gave away.
Dan

_________________
wah
Wah-wah-wah-wah
Wah

finishing up 2 guitars and a rebuild Also got my Dick Boak guitar an Dick Boak signed my guitar. He will retire this Jan.

_________________
John Hall
blues creek guitars
Authorized CF Martin Repair
Member Board of Directors ASIA
You Don't know what you don't know until you know it

I am working on a xxxxxx Cocobobo /WRC 12 fret to the body 00 steel string.

_________________
http://www.Harvestmoonguitars.com

Guitar building is on hold while I build a storage shed alongside the house. It's one of those projects that's been on the to do list for several years so it's good to get it going. The weather has been unusually dry here this summer so good shed building conditions. This is part of my evil plan to free up more space elsewhere for guitar building...

_________________
Once in a while you get shown the light in the strangest of places if you look at it right - Robert Hunter

Looks like you've framed in some space for a nice sized vent fan. Spray booth???

Great minds think alike....

_________________
Once in a while you get shown the light in the strangest of places if you look at it right - Robert Hunter

Nice job, haven't seen let-in bracing in ages.

B

_________________
My memory is so good, sometimes I remember things that never happened.

Nice set of Ziricote. Is it really that red or is it the picture? Looks as red as cocobolo!

Well this is embarrassing you are right this is cocobolo.

_________________
http://www.Harvestmoonguitars.com

_________________
“There are two men inside the artist, the poet and the craftsman. One is born a poet. One becomes a craftsman.” - Emile Zola

Putting finish on the neck and body of the Om I'm building

Sent from my D6603 using Tapatalk

Looking good. Nice backplate on the headstock! What burl is that?

_________________
“There are two men inside the artist, the poet and the craftsman. One is born a poet. One becomes a craftsman.” - Emile Zola

Fretted and set up my 2nd Ukulele and already got started on my 3rd, this one with a spruce top. I'm having a lot of fun building Uke's and they seem to sell pretty well too! This one however is for me.

Well, guess I should post something here as well. Got the top finished on the Thunderchief Acoustic Bass. In a few days I will put bridge back on and set her up.

Well, not really building anymore, but I went over to St. Paul Guitar Repair where Ron and Michelle are finishing off my two last guitars, one a Stahl GC and the other a BBQ Bob 12.Both have white oak backs and Michelle and Ron have been doing a great job of filling the oak and sanding the instruments for finishing. I did the dying of the oak, as neither had a good handle on that procedure. So it was a teaching moment for them. We masked off the binding, purfling with blue 3M tape and all went pretty well. The worst was some mineral deposits like Indian RW, and a very fine point black pen took care of that easily. So, they are both off to finishing at this point!

_________________
J. Brentrup Guitars & Mandolins
http://www.brentrup.com

Hey Haans,
Remember that Smith Creek set of archtop plates I got from you a while back? Finally got around to using them. Sounds great.

_________________
It's not what you don't know that hurts you, it's what you do know that's wrong.

Really a beautiful sunburst Terry! Wish I could have built an archtop with the plates, but glad someone brought them to a great conclusion.
Love to see some close ups...

_________________
J. Brentrup Guitars & Mandolins
http://www.brentrup.com

I'll try to make that happen Haans.

_________________
It's not what you don't know that hurts you, it's what you do know that's wrong.

On hold for a spell till I get a little farther on with a tenor uke I am building (in the mandolin/ukulele forum). A guitilele with oak back, sides and fretboard, from a tree the neighbor had cut down. I snagged a section of it. Spruce neck.

Still making progress on my falcate WRC\Cocobolo 00

_________________
http://www.Harvestmoonguitars.com

Just finished. My take on the Gibson "Nick Lukas".

Nice looking guitar!

_________________
http://www.Harvestmoonguitars.com

Hey John - I noticed the A4 kerfed lining on the back, just curious why not on the top too? Because you see the back braces when looking in the sound hole

I ask because I have 10 sets of the A4 as well.

Great instrument btw!

L

_________________
____________________________________
Time you enjoy wasting is not wasted time.