Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sat Apr 27, 2024 7:37 pm


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: Suggestions?
PostPosted: Wed Jan 10, 2024 5:43 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5419
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
Bought a Wifi Digital microscope, intending to improve my blade sharpening skills and maybe even save some time sharpening.
Now I realize it has other uses, like inspecting abrasive scratches on finish to check removal of previous grits, the same for at fret polishing, and fret end treatment
Bottom picture is of a new double edged razor blade showing the bevels on the edge to give an idea of the magnification and resolution possible...
Does anyone have further potential uses for this bit of kit they can suggest?


You do not have the required permissions to view the files attached to this post.

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.



These users thanked the author Colin North for the post (total 2): Durero (Thu Jan 11, 2024 9:13 pm) • bcombs510 (Wed Jan 10, 2024 12:54 pm)
Top
 Profile  
 
 Post subject: Re: Suggestions?
PostPosted: Wed Jan 10, 2024 8:46 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sun Mar 30, 2008 8:20 am
Posts: 5942
You could check your sandpaper to see how uniformly sized the granules are. Micron papers are supposed to have granules all about the same size. CAMI and P grades (FEPA) have a range of sizes on the same sheet.
If it is variable power you may be able to use it for wood identification under low power magnification.
If the magnification goes low enough and you can manage the hand/eye coordination through a monitor fitting and engraving inlay work (most of my microscopes magnify too much for that work) might be a possibility.



These users thanked the author Clay S. for the post (total 3): Kbore (Thu Jan 11, 2024 2:13 pm) • Bryan Bear (Wed Jan 10, 2024 12:35 pm) • Colin North (Wed Jan 10, 2024 12:07 pm)
Top
 Profile  
 
 Post subject: Re: Suggestions?
PostPosted: Wed Jan 10, 2024 10:06 am 
Offline
Koa
Koa
User avatar

Joined: Thu Jan 10, 2008 5:08 am
Posts: 1906
Location: Raleigh, NC
First name: Steve
Last Name: Sollod
Focus: Build
Status: Amateur
Cool. Interior inspection?

_________________
Steve Sollod (pronounced sorta like "Solid")
www.swiftcreekguitars.com



These users thanked the author sdsollod for the post: Colin North (Wed Jan 10, 2024 12:08 pm)
Top
 Profile  
 
 Post subject: Re: Suggestions?
PostPosted: Wed Jan 10, 2024 11:20 am 
Offline
Koa
Koa
User avatar

Joined: Thu Oct 22, 2009 1:59 am
Posts: 675
First name: Eric
Last Name: Reid
City: Ben Lomond
State: CA
Zip/Postal Code: 95005
Country: USA
Status: Professional
If you're headed down the rabbit hole of blade sharpening, this site might be of interest: https://scienceofsharp.com/2016/11/03/o ... icroscope/
Go to the index for a list of articles.



These users thanked the author Eric Reid for the post (total 2): Colin North (Wed Jan 10, 2024 12:08 pm) • bcombs510 (Wed Jan 10, 2024 12:03 pm)
Top
 Profile  
 
 Post subject: Re: Suggestions?
PostPosted: Wed Jan 10, 2024 12:10 pm 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13084
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
We bought a digital microscope for our shop ten years ago to show customers who like a popular brand of strings why they are.... crap and have very poor quality control. Our microscope captures sloppy winds and such and drives the point home why this brand of strings should be avoided.

_________________
Ann Arbor Guitars



These users thanked the author Hesh for the post (total 2): Kbore (Thu Jan 11, 2024 2:14 pm) • Colin North (Wed Jan 10, 2024 3:14 pm)
Top
 Profile  
 
 Post subject: Re: Suggestions?
PostPosted: Wed Jan 10, 2024 3:26 pm 
Offline
Koa
Koa

Joined: Mon Jul 11, 2005 5:17 am
Posts: 995
Location: United States
City: Tyler
State: Texas
Colin, which brand / model did you get? I like the idea.


Top
 Profile  
 
 Post subject: Re: Suggestions?
PostPosted: Thu Jan 11, 2024 3:00 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5419
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
it is the "Cainda 4K WiFi Digital Microscope Camera for iPhone Android Phone and Windows Mac PC, 3840x2160P Portable Wireless Handheld Microscope "

Amazon Link -

https://www.amazon.com/3840x2160p-Microscope-Adjustable-Wireless-Portable/dp/B0CJV7NRZN/ref=sr_1_4?crid=2SPZEIWTM1RQ4&keywords=Cainda%2B4K%2B3840x2160P%2BWiFi%2BDigital%2BMicroscope&qid=1704959729&sprefix=cainda%2B4k%2B3840x2160p%2Bwifi%2Bdigital%2Bmicroscope%2B%2Caps%2C257&sr=8-4&th=1

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.


Top
 Profile  
 
 Post subject: Re: Suggestions?
PostPosted: Thu Jan 11, 2024 2:24 pm 
Offline
Cocobolo
Cocobolo

Joined: Thu Jan 11, 2018 9:19 am
Posts: 328
Location: St. Charles MO
First name: Karl
Last Name: Borum
State: MO
Zip/Postal Code: 63303
Country: United States
Focus: Build
Status: Amateur
If you could find graduated overlays (optical comparator) you could use it to measure the bevel angle on your sharps, or many measuring tasks, like measuring the tooth set on your saw blades, WBW thickness or bevel angle on purfling. You guys are always costing me money laughing6-hehe

Not a recommendation, just a reference for the little comparitor overlays, shown in this iGaging product (iGaging sells overlays separately):

https://www.amazon.com/iGaging-36-LED10 ... deae8f9840

_________________
Measure Twice,

Karl Borum


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: doncaparker and 190 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com