***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sat Jun 15, 2024 8:29 pm


Board index » Electric Guitar & Bass Construction

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 1
  [ 13 posts ] 
  Print view Previous topic | Next topic 
Author Message
GourmetSaint
PostPosted: Sat May 02, 2015 9:35 pm 
Offline
Mahogany
Mahogany
User avatar

Joined: Fri Apr 05, 2013 7:45 pm
Posts: 50
Stripping all electronics and hardware.

Before:

Image
Image

Stripped:
Image
Image

Now just waiting for delivery of bits. In the meantime I would like some advice on if there is anything I can do about the lifting nitro on the headstock. Close up:
Image
My wiring scheme:
Image
Image
Top
 Profile  
 
Chris Pile
PostPosted: Sat May 02, 2015 11:00 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5781
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
Ummmm.... pretty sure there's no nitro on an Eppy LP.

_________________
"Act your age, not your shoe size" - Prince
Top
 Profile  
 
GourmetSaint
PostPosted: Sat May 02, 2015 11:25 pm 
Offline
Mahogany
Mahogany
User avatar

Joined: Fri Apr 05, 2013 7:45 pm
Posts: 50
Ok. What is the finish? Wbpu?
Top
 Profile  
 
B. Howard
PostPosted: Sun May 03, 2015 7:28 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2010 9:06 pm
Posts: 2739
Location: Magnolia DE
First name: Brian
Last Name: Howard
City: Magnolia
State: Delaware
Zip/Postal Code: 19962
Country: United States
Focus: Repair
Status: Professional
The finish is a polyester. Delaminations like that are quite common over the plastic headstock veneers. You can try wicking some thin CA in under it, sometimes that gives a satisfactory repair sometimes it stays cloudy. It's about a 50/50 from my experience here. A complete refinish of the headstock face is my typical repair.

_________________
Brian

You never know what you are capable of until you actually try.

https://www.howardguitarsdelaware.com/
Top
 Profile  
 
GourmetSaint
PostPosted: Sun May 03, 2015 7:38 am 
Offline
Mahogany
Mahogany
User avatar

Joined: Fri Apr 05, 2013 7:45 pm
Posts: 50
Ty
Top
 Profile  
 
GourmetSaint
PostPosted: Sat May 09, 2015 7:54 pm 
Offline
Mahogany
Mahogany
User avatar

Joined: Fri Apr 05, 2013 7:45 pm
Posts: 50
HELP!!! I need a couple of yards of 6 core 22 awg shielded cable for the run from the Freeway switch to the pots. The Belden part number is 5504FE. I can only find distributors sell 500 or 1000' spools. Can anyone in the US source this?
Top
 Profile  
 
Freeman
PostPosted: Sun May 10, 2015 8:28 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Nov 04, 2010 1:46 pm
Posts: 2128
First name: Freeman
Last Name: Keller
Focus: Build
Status: Amateur
GourmetSaint wrote:
HELP!!! I need a couple of yards of 6 core 22 awg shielded cable for the run from the Freeway switch to the pots. The Belden part number is 5504FE. I can only find distributors sell 500 or 1000' spools. Can anyone in the US source this?


I'm retired now but let me call the electronics shop where I used to work. They have all kinds of scraps of all sorts of different multi conductor cables.
Top
 Profile  
 
dzsmith
PostPosted: Sun May 10, 2015 9:12 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2658
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
You can probably wrap a wire around the bundle for the ground shield.
Not many guitars are wired with shielding these days.
Man, that looks like a complicated wiring scheme.
Very good diagram.
I'm eager to know how it works out for you.
Dan

_________________
wah
Wah-wah-wah-wah
Wah
Top
 Profile  
 
GourmetSaint
PostPosted: Mon May 11, 2015 7:19 am 
Offline
Mahogany
Mahogany
User avatar

Joined: Fri Apr 05, 2013 7:45 pm
Posts: 50
Thanks Freeman

Sent from my Nexus 7 using Tapatalk
Top
 Profile  
 
GourmetSaint
PostPosted: Tue May 12, 2015 6:52 am 
Offline
Mahogany
Mahogany
User avatar

Joined: Fri Apr 05, 2013 7:45 pm
Posts: 50
I found the cable by the foot in the US and ordered 10' for delivery to friends there (wouldn't ship to Oz). My friends will mail on next week.
Top
 Profile  
 
Freeman
PostPosted: Tue May 12, 2015 10:18 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Nov 04, 2010 1:46 pm
Posts: 2128
First name: Freeman
Last Name: Keller
Focus: Build
Status: Amateur
GourmetSaint wrote:
I found the cable by the foot in the US and ordered 10' for delivery to friends there (wouldn't ship to Oz). My friends will mail on next week.


I also found a piece and was going to offer to send it to you today. If you want it PM me a snail mail address.
Top
 Profile  
 
GourmetSaint
PostPosted: Sat May 30, 2015 9:42 pm 
Offline
Mahogany
Mahogany
User avatar

Joined: Fri Apr 05, 2013 7:45 pm
Posts: 50
Finished!! Thanks to Freemann for the 6 core shielded cable to run from Freeway switch to cavity. Neck and bridge pups are GFS Alnico II. Middle is the GFS Dream 180. All pots are 500k push-pulls in 3V/1T Series/Parallel setup. New stop piece, bridge, machine heads, pickguard bracket, and jack.

Thanks for the tip re the bubble under the poly on the headstock. The CCA worked great!!

Image
Image
Image
Top
 Profile  
 
Chris Pile
PostPosted: Sat May 30, 2015 10:55 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5781
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
Nice. Now play it 'til your fingers bleed.

_________________
"Act your age, not your shoe size" - Prince
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 13 posts ] 

Board index » Electric Guitar & Bass Construction

All times are UTC - 5 hours


Who is online

Users browsing this forum: Facebook [Bot] and 16 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com