Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Tue Mar 19, 2024 5:04 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 43 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Wes's build
PostPosted: Wed Aug 01, 2012 2:38 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Jan 10, 2010 11:40 am
Posts: 764
First name: wes
Last Name: Lewis
City: Garland
State: Tx.
Zip/Postal Code: 75044
Focus: Build
Bubinga back and sides $40
Sitka top $15
top was used for packing on some tops I purchased a year ago, extra pieces, so I used shipping cost for value .
neck , fretboard, bindings , bridge , linings ,etc will be cut from board stock I have acclimated.....$30 bucks or so


You do not have the required permissions to view the files attached to this post.

_________________
MK5acoustics.com


Top
 Profile  
 
 Post subject: Re: Wes's build
PostPosted: Wed Aug 01, 2012 9:19 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Oct 12, 2010 9:01 pm
Posts: 3031
First name: Tony
Last Name: C
City: Brooklyn
State: NY
Focus: Build
Status: Amateur
That soundboard says "No charge" on it. You paid the shipping for the wood you bought. Packing material has no value in my mind. Just something to think about if you get too close to your budget limit. I don't think anyone would have a beef with packing material having no value.

_________________
http://www.CostaGuitars.com
PMoMC


Top
 Profile  
 
 Post subject: Re: Wes's build
PostPosted: Thu Aug 02, 2012 9:20 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Jan 10, 2010 11:40 am
Posts: 764
First name: wes
Last Name: Lewis
City: Garland
State: Tx.
Zip/Postal Code: 75044
Focus: Build
I got the sides bent , the soundboard and back glued up!!


You do not have the required permissions to view the files attached to this post.

_________________
MK5acoustics.com


Top
 Profile  
 
 Post subject: Re: Wes's build
PostPosted: Fri Aug 03, 2012 9:01 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Jan 10, 2010 11:40 am
Posts: 764
First name: wes
Last Name: Lewis
City: Garland
State: Tx.
Zip/Postal Code: 75044
Focus: Build
cutting linings from a bubinga board , and adi spruce for laminated braces..


You do not have the required permissions to view the files attached to this post.

_________________
MK5acoustics.com


Top
 Profile  
 
 Post subject: Re: Wes's build
PostPosted: Sun Aug 05, 2012 7:40 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Jan 10, 2010 11:40 am
Posts: 764
First name: wes
Last Name: Lewis
City: Garland
State: Tx.
Zip/Postal Code: 75044
Focus: Build
got most of the bending done, including the bindings as well...I am using solid linings so I bend the individual pieces , glue the laminates then rebend to the final shape...…the soundboard braces are leftover adi spruce...


You do not have the required permissions to view the files attached to this post.

_________________
MK5acoustics.com


Top
 Profile  
 
 Post subject: Re: Wes's build
PostPosted: Sun Aug 05, 2012 9:04 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
Looking good ! [:Y:]

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
 Post subject: Re: Wes's build
PostPosted: Sun Aug 05, 2012 9:06 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
Tony_in_NYC wrote:
That soundboard says "No charge" on it. You paid the shipping for the wood you bought. Packing material has no value in my mind. Just something to think about if you get too close to your budget limit. I don't think anyone would have a beef with packing material having no value.



I agree !

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
 Post subject: Re: Wes's build
PostPosted: Sun Aug 05, 2012 9:27 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Jan 10, 2010 11:40 am
Posts: 764
First name: wes
Last Name: Lewis
City: Garland
State: Tx.
Zip/Postal Code: 75044
Focus: Build
I should have no problem with cost , most everything is being made from leftovers or boards I have , and I did get some of those cheap Chinese tuners, like 4 sets about a year ago, and you definitely get what you pay for ..stuff is junk, at about 7 bucks per set they are overpriced!! laughing6-hehe
I will most certainly get rid of those once the build is completed.....having fun though...soundboard will have my sweep carbon fiber bracing , and will be a 13 fret OM style, probably with a soundport…along with a compensated nut and saddle, using a Gore inspired nut machining jig for the nut...hopefully I will have it completed on time...Darn Full time gets in the way of my building time!!!!! gaah

_________________
MK5acoustics.com


Top
 Profile  
 
 Post subject: Wes's build
PostPosted: Sun Aug 05, 2012 11:28 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Oct 12, 2010 9:01 pm
Posts: 3031
First name: Tony
Last Name: C
City: Brooklyn
State: NY
Focus: Build
Status: Amateur
Looks good to me!

_________________
http://www.CostaGuitars.com
PMoMC


Top
 Profile  
 
 Post subject: Re: Wes's build
PostPosted: Wed Aug 08, 2012 6:45 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Jan 10, 2010 11:40 am
Posts: 764
First name: wes
Last Name: Lewis
City: Garland
State: Tx.
Zip/Postal Code: 75044
Focus: Build
making progress!! bliss


You do not have the required permissions to view the files attached to this post.

_________________
MK5acoustics.com


Top
 Profile  
 
 Post subject: Re: Wes's build
PostPosted: Thu Aug 09, 2012 8:05 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
This is going to be a nice build ! Looking forward to hearing this one ! [clap]

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
 Post subject: Re: Wes's build
PostPosted: Thu Aug 09, 2012 9:50 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Feb 12, 2009 12:12 pm
Posts: 3290
First name: Bryan
Last Name: Bear
City: St. Louis
State: Mo
Country: USA
Focus: Build
Status: Amateur
Nice looking, that rim looks bullet proof too. Nice clean work.

_________________
Bryan Bear PMoMC

Take care of your feet, and your feet will take care of you.


Top
 Profile  
 
 Post subject: Re: Wes's build
PostPosted: Thu Aug 09, 2012 1:15 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
Would you be willing to elaborate a bit on the heel block design . Thats interesting.

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
 Post subject: Re: Wes's build
PostPosted: Thu Aug 09, 2012 1:39 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Jan 10, 2010 11:40 am
Posts: 764
First name: wes
Last Name: Lewis
City: Garland
State: Tx.
Zip/Postal Code: 75044
Focus: Build
It's just 3/4 inch ply with.a bubinga cap and laminated splints between the linings
bliss

_________________
MK5acoustics.com


Top
 Profile  
 
 Post subject: Re: Wes's build
PostPosted: Sun Aug 12, 2012 9:08 am 
Offline
Contributing Member
Contributing Member

Joined: Sun Jan 10, 2010 11:40 am
Posts: 764
First name: wes
Last Name: Lewis
City: Garland
State: Tx.
Zip/Postal Code: 75044
Focus: Build
made the rosette last night..its padauck thicknessed to .028 then ca'd one at a time in a .031 channel...I cut the channel , apply shellac , glue in strip , plane / sand smoothe, then go to the next one..


You do not have the required permissions to view the files attached to this post.

_________________
MK5acoustics.com


Top
 Profile  
 
 Post subject: Re: Wes's build
PostPosted: Sun Aug 12, 2012 9:40 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
That Is Nice !! Wow . [:Y:] [:Y:]

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
 Post subject: Re: Wes's build
PostPosted: Sun Aug 12, 2012 9:44 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Feb 12, 2009 12:12 pm
Posts: 3290
First name: Bryan
Last Name: Bear
City: St. Louis
State: Mo
Country: USA
Focus: Build
Status: Amateur
Awesome!

_________________
Bryan Bear PMoMC

Take care of your feet, and your feet will take care of you.


Top
 Profile  
 
 Post subject: Wes's build
PostPosted: Sun Aug 12, 2012 10:24 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Oct 12, 2010 9:01 pm
Posts: 3031
First name: Tony
Last Name: C
City: Brooklyn
State: NY
Focus: Build
Status: Amateur
I have seen a rosette like that with 4 circles but this is much cooler! Really nice!

_________________
http://www.CostaGuitars.com
PMoMC


Top
 Profile  
 
 Post subject: Re: Wes's build
PostPosted: Sun Aug 12, 2012 10:37 am 
Offline
Contributing Member
Contributing Member

Joined: Fri Mar 04, 2011 3:02 pm
Posts: 195
Location: Glen Burnie Md.
First name: steve
Last Name: barbour
Country: U.S.
Focus: Build
Status: Amateur
very cool rosette!

_________________
Kyle


Top
 Profile  
 
 Post subject: Re: Wes's build
PostPosted: Sun Aug 12, 2012 12:36 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7233
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
That is ingenious - I like it.

_________________
Steve Smith
"Music is what feelings sound like"


Top
 Profile  
 
 Post subject: Re: Wes's build
PostPosted: Sun Aug 12, 2012 5:20 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Feb 02, 2008 4:01 pm
Posts: 1104
Location: Winfield, IL.
Sweet rosette Wes. I'm getting dizzy.

Steve


Top
 Profile  
 
 Post subject: Re: Wes's build
PostPosted: Sun Aug 12, 2012 8:40 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Jan 10, 2010 11:40 am
Posts: 764
First name: wes
Last Name: Lewis
City: Garland
State: Tx.
Zip/Postal Code: 75044
Focus: Build
Nothing like spending a whole sunday watching TV and "loofering" as my better half puts it!! pizza

Got the soundhole doubler glued on, and the bridge plate and carbon fiber epoxied on, along with getting the fretboard cut, binding installed , and fretmarkers …


You do not have the required permissions to view the files attached to this post.

_________________
MK5acoustics.com


Top
 Profile  
 
 Post subject: Re: Wes's build
PostPosted: Sun Aug 12, 2012 8:41 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Jan 10, 2010 11:40 am
Posts: 764
First name: wes
Last Name: Lewis
City: Garland
State: Tx.
Zip/Postal Code: 75044
Focus: Build
fret markers made with padauck scrap


You do not have the required permissions to view the files attached to this post.

_________________
MK5acoustics.com


Top
 Profile  
 
 Post subject: Re: Wes's build
PostPosted: Tue Aug 14, 2012 8:46 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Jan 10, 2010 11:40 am
Posts: 764
First name: wes
Last Name: Lewis
City: Garland
State: Tx.
Zip/Postal Code: 75044
Focus: Build
bracing the top with carbon fiber tow...


You do not have the required permissions to view the files attached to this post.

_________________
MK5acoustics.com


Top
 Profile  
 
 Post subject: Re: Wes's build
PostPosted: Wed Aug 15, 2012 7:07 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
I like the fret board wes. Crap , I like the whole build LOL great work

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 43 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com