***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Tue Jul 29, 2025 8:17 pm


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 
  Print view Previous topic | Next topic 
Author Message
jsmith
 Post subject: Fuji Spray System
PostPosted: Fri Jul 01, 2016 1:33 pm 
Offline
Cocobolo
Cocobolo

Joined: Tue Jul 15, 2008 8:32 pm
Posts: 321
I have a Mini Mite 4, and I'm in the market for a new gun. My old one has an H4 air cap. But I see that their standard issue gun is equipped with an H3 cap, and it's also rated for nitro. Is anyone else here shooting nitro through a Fuji HVLP spray system? If so, which size air cap are you using--H3 or H4?

_________________
michael propsom
www.propsomguitars.com


Last edited by jsmith on Fri Jul 01, 2016 3:47 pm, edited 1 time in total.

Top
 Profile  
 
Jim Watts
 Post subject: Re: Fuji Spray System
PostPosted: Fri Jul 01, 2016 3:17 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu May 12, 2005 5:46 am
Posts: 2997
Location: United States
I spray with an older Fuji system. It came with an H3 but since I've changed to an H4 and seem to get better results.

_________________
Jim Watts
http://jameswattsguitars.com


These users thanked the author Jim Watts for the post: jsmith (Fri Jul 01, 2016 10:12 pm)
Top
 Profile  
 
Woodie G
 Post subject: Re: Fuji Spray System
PostPosted: Fri Jul 01, 2016 4:50 pm 
Offline
Koa
Koa
User avatar

Joined: Sat Jan 19, 2013 7:33 am
Posts: 1900
First name: Willard
Last Name: Guthrie
City: Cumberland
State: Maryland 21502
Zip/Postal Code: 21502
Country: United State
Focus: Repair
Status: Semi-pro
We have the Fuji four stage turbine and have used the XPC and T-75G guns for lacquer and waterbased finishes. The 1.3mm aircap/needle set for the T-75G does a nice job on lacquer - on par with the Iwata and SATA conversion guns in the shop. While the 1.3mm set will spray waterbased, the 1.0mm does a better job atomizing finishes like Enduro-Var. All stainless fluid passages, etc. The T-75G runs about $319 via Amazon Prime. If converting to the PPS system, the #2 adaptor works (same as Iwata full-sized guns use).

_________________
A constellation only takes shape when one maps the whole.
- Beth Brower


These users thanked the author Woodie G for the post: jsmith (Fri Jul 01, 2016 10:12 pm)
Top
 Profile  
 
WaddyThomson
 Post subject: Re: Fuji Spray System
PostPosted: Fri Jul 01, 2016 10:02 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Mar 19, 2007 7:05 am
Posts: 9191
Location: United States
First name: Waddy
Last Name: Thomson
City: Charlotte
State: NC
Focus: Build
Status: Semi-pro
FWIW, there is a recent discussion on Fuji HVLP systems and guns on MIMF Forum this week. You might want to check it out.

_________________
Waddy

Photobucket Build Album Library

Sound Clips of most of my guitars


These users thanked the author WaddyThomson for the post: jsmith (Fri Jul 01, 2016 10:12 pm)
Top
 Profile  
 
jsmith
 Post subject: Re: Fuji Spray System
PostPosted: Fri Jul 01, 2016 10:13 pm 
Offline
Cocobolo
Cocobolo

Joined: Tue Jul 15, 2008 8:32 pm
Posts: 321
Thanks, gentlemen!

_________________
michael propsom
www.propsomguitars.com
Top
 Profile  
 
klooker
 Post subject: Re: Fuji Spray System
PostPosted: Sat Jul 02, 2016 10:17 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Aug 17, 2010 3:31 pm
Posts: 1682
First name: Kevin
Last Name: Looker
City: Worthington
State: OH
Zip/Postal Code: 43085
Country: USA
Focus: Build
Status: Amateur
Mine came with a 4 but I changed to a 3 and feel I get better results with Mohawk stringed instrument lacquer, but of course, YMMV.

_________________
I'm not a luthier.
I'm just a guy who builds guitars in his basement.
It's better than playing golf.


These users thanked the author klooker for the post: jsmith (Sat Jul 02, 2016 12:04 pm)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 14 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com