Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Oct 31, 2024 6:34 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 9 posts ] 
Author Message
PostPosted: Fri Feb 15, 2008 1:59 pm 
Offline
Koa
Koa
User avatar

Joined: Wed Jan 31, 2007 7:17 am
Posts: 1383
Location: Canada
For those who’ve lusted after a hacklinger gauge, but were repelled with equal force by the price, you may want to try building your own.
I’ve always been a bit nervous when scraping recurves in archtops (& a violin), not knowing how much material was left! This gauge allows “one-sided” thickness measurement, using rare earth magnets. When the spring pull overcomes the attraction force (degraded by material thickness) of magnets inside & outside the instrument, the gauge magnet detaches with a click, against a fixed “stopper”. Whatever the indicator reads at that instant is the thickness. The stopper keeps the inner & outer magnets close enough together that the inner doesn’t “fall off” & rattle around inside the (guitar) – it stays firmly in place opposite the gauge. (It will even jump over braces, if they’re not too high).
For component testing, I looped monofilament over my scale, which was placed onto the arm of a radial arm saw. I then tested springs (and magnet combos) to determine the force needed to stretch them 1” (or, for magnets, to pull them apart). The target was a spring (I tried 5) whose 1” force was about the same as a magnet combo force with 1/8” material between the magnets. (That gives the gauge lots of range for thicker & thinner material). I settled on a spring (Traker TE55) with a “1 inch force” of 70g and a combo of two 3/8 magnets inside the gauge & a single ½” magnet inside the guitar.
Anyway…………….here’s how I made it.


You do not have the required permissions to view the files attached to this post.

_________________
Dave
Milton, ON


Top
 Profile  
 
PostPosted: Fri Feb 15, 2008 4:28 pm 
Offline
Koa
Koa
User avatar

Joined: Mon Sep 12, 2005 12:40 am
Posts: 1900
Location: Spokane, Washington
First name: Pat
Last Name: Foster
State: Eastern WA
Focus: Build
Very cool, Dave. Thanks for posting!

Do you have a figure for its accuracy?

_________________
now known around here as Pat Foster
_________________
http://www.patfosterguitars.com


Top
 Profile  
 
PostPosted: Fri Feb 15, 2008 7:28 pm 
Offline
Koa
Koa
User avatar

Joined: Wed Jan 31, 2007 7:17 am
Posts: 1383
Location: Canada
Pat, regarding accuracy, all I can say is remember that it's not a mechanical measurement (like calipers) so three decimal place accuracy is not possible. And using it is an acquired skill......when you're close, pull the plunger VERY slowly, keep the indicator from jumping on release, always keep gauge perpendicular to the surface, etc. But if you've built it & particularly calibrated it carefully, and then use it properly, it works. (eg 10 readings on a 1/8" sample will all be within the .120" & .130" marks)

_________________
Dave
Milton, ON


Top
 Profile  
 
PostPosted: Sun Feb 17, 2008 10:26 am 
Offline
Koa
Koa

Joined: Mon Jan 17, 2005 4:05 pm
Posts: 852
Location: United States
First name: Josh
Last Name: French
City: Houston
State: TX
Dave - One of the most useful things I've seen on the OLF to date! Thank you for taking the time.

_________________
Instagram: @jfrenchluthier
Web: https://www.jfrenchguitars.com/


Top
 Profile  
 
PostPosted: Sun Feb 17, 2008 9:25 pm 
Offline
Koa
Koa

Joined: Fri Jan 25, 2008 9:55 am
Posts: 982
Location: Traverse City Michigan
Dave you are a genius! [:Y:]

_________________
Ken


Top
 Profile  
 
PostPosted: Sun Feb 17, 2008 10:30 pm 
Offline
Koa
Koa
User avatar

Joined: Fri Apr 08, 2005 2:44 am
Posts: 987
Location: United States
First name: Joe
Last Name: Breault
City: Merrimack
State: NH
Status: Amateur
Very cool Dave. Just a quick question on setting up the scale for measuring...did you just use trial and error to get it right? The difference in force needed to pull the magnets apart when a piece is 3mm thick versus 1mm is exponentially different as opposed to evenly scaled. (I'm not sure I'm making sense here)
Attachment:
hacklinger.jpg

Notice on this one how the gradations aren't even.


You do not have the required permissions to view the files attached to this post.

_________________
Joe Breault
Merrimack, NH
Perpetual novice


Top
 Profile  
 
PostPosted: Mon Feb 18, 2008 9:03 am 
Offline
Koa
Koa

Joined: Fri Jan 25, 2008 9:55 am
Posts: 982
Location: Traverse City Michigan
The spring force is constant (Hooke's law) so the magnetic force becomes less and less as the distance increases until it lets go. Therefor the scale is not linear.

_________________
Ken


Top
 Profile  
 
PostPosted: Mon Feb 18, 2008 9:23 am 
Offline
Koa
Koa
User avatar

Joined: Wed Jan 31, 2007 7:17 am
Posts: 1383
Location: Canada
Yes, you do see the graduations becoming farther apart as the material thins. (You can see this a bit in the last pic)
By the way, I found it useful to calibrate on a piece of masking, to make sure of the graduation locations, before transferring the marks with a very sharp file to the tube.

_________________
Dave
Milton, ON


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com