***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Oct 31, 2024 7:37 pm


Board index » Fixture, Video and Picture Tutorials

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 
  Print view Previous topic | Next topic 
Author Message
SniderMike
PostPosted: Tue Feb 24, 2009 10:06 am 
Offline
Koa
Koa
User avatar

Joined: Tue Mar 14, 2006 4:08 pm
Posts: 1018
Location: Denver, Colorado
Great thread, Todd. The bench hook is one of my favorites too.

We have the students attach the cleats with a sliding dovetail joint at the school I teach at. Maybe overkill, but a good lesson on using the router table and learning the joint.

_________________
Mike

"The Dude abides. I don't know about you but I take comfort in that. It's good knowin' he's out there. The Dude. Takin' 'er easy for all us sinners. Shoosh." The Stranger
Top
 Profile  
 
Dennis Leahy
PostPosted: Tue Feb 24, 2009 2:21 pm 
Offline
Koa
Koa
User avatar

Joined: Wed Jun 08, 2005 1:00 pm
Posts: 1644
Location: United States
City: Duluth
State: MN
Country: USA
Focus: Build
Status: Amateur
Oh, I didn't know there was a name for that jig. I used to make variants of it for fine cabinet and furniture work. Now I know what to call it!

But even better, you're showing a couple of ways it is particularly well-suited for lutherie - like trimming guitar rim ends.

I had forgotten about using a jig like this. Time to make a new one! Thanks!

Dennis

_________________
Dennis Leahy
Duluth, MN, USA
7th Sense Multimedia
Top
 Profile  
 
TonyFrancis
PostPosted: Tue Feb 24, 2009 4:49 pm 
Offline
Koa
Koa

Joined: Mon Jul 02, 2007 1:22 pm
Posts: 766
-


Last edited by TonyFrancis on Wed Dec 04, 2013 2:14 am, edited 1 time in total.

Top
 Profile  
 
James Orr
PostPosted: Wed Feb 25, 2009 2:20 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Feb 15, 2006 7:37 am
Posts: 4803
Nice. Thanks, Todd. This will really help me in cutting sides to length.
Top
 Profile  
 
Darryl Young
PostPosted: Thu Feb 26, 2009 8:43 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 22, 2008 9:31 pm
Posts: 1877
First name: Darryl
Last Name: Young
State: AR
Country: USA
Focus: Build
Status: Amateur
Quote:
From Todd Stock: Getting the fence squared to the edge of the base is the only real persnickity task in making the hook...use a good square and set the edge of the fence a 1/32" to 1/64" in from the edge of the base.


Todd, am I understanding correctly that the fence should be slightly shorter than the base is wide......and you are leaving the ends of the fence slightly short of the base? I'm curious why it is left short? (I'm sure you have a reason but I can' think of one offhand) Does this cause a problem when trimming using the fence as a guide?

_________________
Formerly known as Adaboy.......
Top
 Profile  
 
Darryl Young
PostPosted: Thu Feb 26, 2009 9:51 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 22, 2008 9:31 pm
Posts: 1877
First name: Darryl
Last Name: Young
State: AR
Country: USA
Focus: Build
Status: Amateur
By the way,.......anyone have a recommendation for nice flush cut saw that could be used as shown in the pics above?

_________________
Formerly known as Adaboy.......
Top
 Profile  
 
leparker
PostPosted: Mon Mar 02, 2009 8:49 am 
Offline
Walnut
Walnut

Joined: Tue Feb 17, 2009 3:16 pm
Posts: 19
Darryl Young wrote:
Quote:
From Todd Stock: Getting the fence squared to the edge of the base is the only real persnickity task in making the hook...use a good square and set the edge of the fence a 1/32" to 1/64" in from the edge of the base.


Todd, am I understanding correctly that the fence should be slightly shorter than the base is wide......and you are leaving the ends of the fence slightly short of the base? I'm curious why it is left short? (I'm sure you have a reason but I can' think of one offhand) Does this cause a problem when trimming using the fence as a guide?


Hey Darryl,

I'm not Todd but I sent him a PM about this and here is his reply:

"Cutting the fence just slightly shorter than the base (1/64" to 1/32") prevents the plane from getting hung up on the fence while still supporting the end of the work...just works better that way."

_________________
Larry
Fox Haven Lutherie
Top
 Profile  
 
Darryl Young
PostPosted: Tue Mar 03, 2009 1:52 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 22, 2008 9:31 pm
Posts: 1877
First name: Darryl
Last Name: Young
State: AR
Country: USA
Focus: Build
Status: Amateur
Thanks leparker!

_________________
Formerly known as Adaboy.......
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 

Board index » Fixture, Video and Picture Tutorials

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 4 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com