Official Luthiers Forum! • View topic

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

How thick?

Page 1 of 1

[ 5 posts ]

Print view

Previous topic | Next topic

Author

Message

Chris Ensor

Post subject: How thick?

Posted: Fri Mar 26, 2010 9:55 am

Contributing Member

Joined: Sat Dec 05, 2009 3:51 pm
Posts: 1204
First name: Chris
Last Name: Ensor
City: Springfield
State: Missouri
Focus: Build
Status: Professional

Related to the slotted headstock thread, how thick do you make your classical headstocks? I see that a lot of the tuners (3 on a plate) are about 17mm wide. So, do you make the headstock as thick as the tuner plate and then add the veneers and overlays (about 2.5mm on each side)? What do you guys do?

_________________
ELEVATE || Next Level Lutherie
http://elevatelutherie.com
&
http://ensorguitars.com

Top

WaddyThomson

Post subject: Re: How thick?

Posted: Fri Mar 26, 2010 10:01 am

Contributing Member

Joined: Mon Mar 19, 2007 7:05 am
Posts: 9191
Location: United States
First name: Waddy
Last Name: Thomson
City: Charlotte
State: NC
Focus: Build
Status: Semi-pro

Make sure you have your tuning machines in hand and measure them carefully. They are not all the same. However, somewhere in the 20mm range is near the finished thickness necessary.

_________________
Waddy

Photobucket Build Album Library

Sound Clips of most of my guitars

Top

Alexandru Marian

Post subject: Re: How thick?

Posted: Fri Mar 26, 2010 11:52 am

Brazilian Rosewood

Joined: Thu Mar 22, 2007 10:59 pm
Posts: 2103
Location: Bucharest, Romania
Country: Romania
Focus: Build
Status: Professional

I went from 19 to 21.5. Thicker when using a hardwood back on the headstock. The important thing is to have the tuner plate, 17mm or whatever your particular model is, centered on those 19-21.

_________________
Build log

Top

Mike Collins

Post subject: Re: How thick?

Posted: Fri Mar 26, 2010 1:11 pm

Brazilian Rosewood

Joined: Mon Mar 06, 2006 10:10 pm
Posts: 2485
Location: Argyle New York
First name: Mike/Mikey/Michael/hey you!
Last Name: Collins
City: Argyle
State: New York
Zip/Postal Code: 12809
Country: U.S.A. /America-yea!!
Focus: Build
Status: Professional

I make mine 20mm for a standard head and 21mm for a
veneered front & back head.
As stated above measure the plates and center them on the head side.

Mc

_________________
Mike Collins

Top

Scotty

Post subject: Re: How thick?

Posted: Fri Mar 26, 2010 9:41 pm

Walnut

Joined: Mon Feb 01, 2010 4:59 pm
Posts: 25
Focus: Repair
Status: Professional

Including the veneer, my classical headstocks have been 20 - 21 mm, and Sloane and Gotoh tuners at about 18.25mm fit just right when centered. I wouldn't go less than 20mm if it were me.

Top

Page 1 of 1

[ 5 posts ]

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: Bing [Bot], meddlingfool and 11 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: