Official Luthiers Forum! • View topic

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

Jet 10/20 problem.

Page 1 of 1

[ 9 posts ]

Print view

Previous topic | Next topic

Author

Message

Mark Maquillan

Post subject: Jet 10/20 problem.

Posted: Sat Feb 01, 2014 7:42 pm

Contributing Member

Joined: Tue Apr 17, 2007 3:50 am
Posts: 305
Location: Central Washington United States

This just started happening the other day. I've had this for a few years and have not had any problems. Any ideas on what might be going on? This was a brand new piece of sandpaper two passes ago. The paper overlapped and it tore just at the attachment point.

Thanks.

You do not have the required permissions to view the files attached to this post.

_________________
Wisdom is justified by her children

Top

Chris Pile

Post subject: Re: Jet 10/20 problem.

Posted: Sat Feb 01, 2014 7:43 pm

Contributing Member

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5900
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional

I hate when that happens.

_________________
"Act your age, not your shoe size" - Prince

Top

weslewis

Post subject: Re: Jet 10/20 problem.

Posted: Sat Feb 01, 2014 8:20 pm

Contributing Member

Joined: Sun Jan 10, 2010 11:40 am
Posts: 764
First name: wes
Last Name: Lewis
City: Garland
State: Tx.
Zip/Postal Code: 75044
Focus: Build

what kind of paper?????

_________________
MK5acoustics.com

Top

Mark Maquillan

Post subject: Re: Jet 10/20 problem.

Posted: Sat Feb 01, 2014 8:43 pm

Contributing Member

Joined: Tue Apr 17, 2007 3:50 am
Posts: 305
Location: Central Washington United States

Can't remember wher I got it. There is no name on the paper. It's an X weight aluminum oxide. Pretty sure I got it from an OLF member recommended source ;/

_________________
Wisdom is justified by her children

Top

Kevin Mason

Post subject: Re: Jet 10/20 problem.

Posted: Sat Feb 01, 2014 9:11 pm

Cocobolo

Joined: Tue Nov 14, 2006 4:10 am
Posts: 151
Location: United States
First name: Kevin
Last Name: Mason
City: Wheeling
State: IL
Zip/Postal Code: 60090
Country: USA
Focus: Build
Status: Semi-pro

Something similar happens to me when I put on a new roll. I have found it is because the paper is not tight enough and is slipping, because it is not tucked in to the clip as far as possible. It takes me a few times of running the drum, finding which clip is not tight enough, adjusting, and running again. When it seems to be tight enough, I start running scrap wood through to see if there is anymore slippage.

_________________
Kevin Mason
Mason Guitars and Ukuleles on Facebook
http://masonguitars.net

These users thanked the author Kevin Mason for the post: Mark Maquillan (Sat Feb 01, 2014 9:34 pm)

Top

weslewis

Post subject: Re: Jet 10/20 problem.

Posted: Sat Feb 01, 2014 10:21 pm

Contributing Member

Joined: Sun Jan 10, 2010 11:40 am
Posts: 764
First name: wes
Last Name: Lewis
City: Garland
State: Tx.
Zip/Postal Code: 75044
Focus: Build

try some klingspor, I use the 80 grit , I have a template drawn on my work table and just cut what I need ...http://www.woodworkingshop.com/product/pe40210/

_________________
MK5acoustics.com

Top

Clay S.

Post subject: Re: Jet 10/20 problem.

Posted: Sun Feb 02, 2014 7:54 am

Brazilian Rosewood

Joined: Sun Mar 30, 2008 8:20 am
Posts: 5968

Some roll abrasives seem to stretch when used and require periodic re-tightening. I've had that happen with sanding belt as well. I listen to my drum sander and it sounds a little different when the abrasive needs to be re-secured.

Top

Page 1 of 1

[ 9 posts ]

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: Bing [Bot], Ken Lewis and 25 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: