Official Luthiers Forum! • View topic

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

Heat Resistant Glue

Page 1 of 1

[ 6 posts ]

Print view

Previous topic | Next topic

Author

Message

DannyV

Post subject: Heat Resistant Glue

Posted: Mon Jan 15, 2018 5:40 pm

Contributing Member

Joined: Sat Dec 30, 2006 3:20 am
Posts: 2593
Location: Powell River BC Canada
First name: Danny
Last Name: Vincent

Hello Community!

On the neck I'm currently working on, I would like to make the backstrap with back offcuts. This will require a book matched centre joint. I have done this in the past. They require a little touch on the pipe to bend them into the volute. I have had the joint open up a touch in the past. No biggy on darker woods but this isn't.

Any opinions on best glue for this?

Thanks!

Top

Clinchriver

Post subject: Re: Heat Resistant Glue

Posted: Mon Jan 15, 2018 5:48 pm

Contributing Member

Joined: Sat Feb 19, 2011 7:44 pm
Posts: 1225
Location: Andersonville
State: Tennessee
Country: USA
Focus: Build
Status: Professional

Possibly Titebond III I use it when I glue up binding strips its come out of the bender with no issues. Glue up a test dummy and see what happens.

Top

meddlingfool

Post subject: Re: Heat Resistant Glue

Posted: Mon Jan 15, 2018 5:55 pm

Brazilian Rosewood

Joined: Wed Feb 20, 2008 7:15 pm
Posts: 7539
First name: Ed
Last Name: Bond
City: Nanaimo
Country: Canada
Focus: Build
Status: Professional

Yeah, TB 3 seems to be pretty good for purflings, so maybe it'll work for that application too. I don't do a lot of them, but when I do, I usually thin the backstrap down enough to not require heat to bend. I guess it depends on the radius of the volute...

Top

mqbernardo

Post subject: Re: Heat Resistant Glue

Posted: Tue Jan 16, 2018 4:26 am

Contributing Member

Joined: Fri Dec 17, 2010 6:22 pm
Posts: 1295
First name: Miguel
Last Name: Bernardo
Country: portugal
Focus: Build
Status: Semi-pro

Started using PU glue for purfs sometime ago. They bend easily and never delaminate. TB 3 also works but introduces a lot of water and I ended up with twisted/cupped stuff if I used it on large surfaces.

_________________
member of the guild of professional dilettantes

Top

mqbernardo

Post subject: Re: Heat Resistant Glue

Posted: Tue Jan 16, 2018 4:27 am

Contributing Member

Joined: Fri Dec 17, 2010 6:22 pm
Posts: 1295
First name: Miguel
Last Name: Bernardo
Country: portugal
Focus: Build
Status: Semi-pro

Sorry, just realized you only need to joint halves. Not much cupping in that.

_________________
member of the guild of professional dilettantes

Top

Mark Mc

Post subject: Re: Heat Resistant Glue

Posted: Tue Jan 16, 2018 3:28 pm

Koa

Joined: Sun Apr 25, 2010 4:46 pm
Posts: 541
First name: Mark
Last Name: McLean
City: Sydney
State: New South Wales
Zip/Postal Code: 2145
Country: Australia
Focus: Build
Status: Amateur

I have also had success with TB3 in a similar situation. But if you get it too hot, anything you use will give way.

Top

Page 1 of 1

[ 6 posts ]

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: guitarjtb, stumblin and 17 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: