Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Oct 31, 2024 6:52 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: National Neck Set
PostPosted: Mon Jan 17, 2011 1:54 pm 
Offline
Walnut
Walnut

Joined: Mon Jan 17, 2011 1:10 pm
Posts: 1
First name: John
Last Name: Fernandez
City: Brick
State: NJ
Zip/Postal Code: 08724
Focus: Repair
Status: Amateur
Hi - Looking to earn how a neck set is done on a National Steel round neck. Haven't found anything on this forum or on the web yet.

Anybody know where I could find this info? Thanks


Top
 Profile  
 
 Post subject: Re: National Neck Set
PostPosted: Fri Jan 21, 2011 1:12 pm 
Offline
Koa
Koa

Joined: Fri Dec 16, 2005 1:47 am
Posts: 504
Location: United States
Check at the MIMF. I think there is a write-up in the library.


Top
 Profile  
 
 Post subject: Re: National Neck Set
PostPosted: Fri Jan 21, 2011 3:16 pm 
Offline
Koa
Koa

Joined: Tue Mar 01, 2005 3:00 pm
Posts: 656
Location: United States
Focus: Build
Status: Professional
I have restored a '30 tri cone and a '35 or so Trojan (wood bodied)
Unfortunately I only took a few photos of each under restoration.
A metal body nat is pretty much banjo construction with a neck stick mortised into the actual neck, which runs the length of the body and is held in place by mushroom pillars and the end pin screw.
I assume you're talking about a metal body so here goes:
Remove all the cones and covers.
Pop the mushroom suport pilars, remove the end pin screw and the little blocks glued to the neck stick up at the heastock end, remove the inlay dots and the screws and nuts through the body and work the neck free from the body.

On mine the neck stick was warped, so I steamed it apart and replaced it.

The Cantilevered portion of the fingerboard was warped, so I made a wafer of Carbon Fiber and let it into the back of the fingerboard. The binding covered the edges

While I was at it I made a shim, bound it with Ivroid and put between the heel and the body to correct the intonation. Not vintage, but now the guitar plays in tune.

The neck set is a function of the mushroom pillars and finally held in place with the end pin screw.


Sorry the pics are in reverse order. I'm not too good at this pic posting thing.

Hope this helps.

-C


You do not have the required permissions to view the files attached to this post.

_________________
Freeborn Guitars
and home of BeauGuardĀ©


Top
 Profile  
 
 Post subject: Re: National Neck Set
PostPosted: Tue Mar 01, 2011 9:58 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Nov 13, 2009 8:56 am
Posts: 388
Location: Minneapolis
First name: Dan
Last Name: Pennington
City: Brooklyn Park
State: MN
Zip/Postal Code: 55428
Country: United States
Focus: Build
Status: Semi-pro
Vibroluxe
Is it a Style O or a Tricone?


Top
 Profile  
 
 Post subject: Re: National Neck Set
PostPosted: Sat Apr 23, 2011 9:26 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Sat Jun 21, 2008 10:58 am
Posts: 2774
Location: Tampa, Florida USA
Sometimes you have to recut the stick angles if you have the room and maybe shimn under the FB tongue. There's also a method of cutting the stick and removing a wedge at the top of it and gluing it into the cut to correct the neck angle. Not to sure you want to be doing necksets on resos until you know how they are constructed though.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com